Linuxteaching
An ATX computer case is a PC case that complies to the ATX (Advanced Technology Extended) computer tower specifications. This standard was introduced by Intel in 1995 and defines acceptable sizes for motherboards, desktop computer cases, and computer power supplies.
- What does ATX mean on a case?
- What case size is ATX?
- How do you tell if your computer case is ATX?
- Is an ATX case a mid tower?
- Is Eatx better than ATX?
- What happens if you don't use a desktop case?
- What size PC case is best?
- Is ATX full size?
- What PC case should I get 2020?
- How do you know if a case will fit a motherboard?
- Will any motherboard fit in my case?
- What is a BTX motherboard?
What does ATX mean on a case?
This is a Syber M Series with a mid-size tower case. “Advanced Technology eXtended” is a form factor developed by Intel. The vast majority of PCs on the market use cases that fit the form factor specification. The Syber M uses Mid-size towers that allow for a large range of expandability.
What case size is ATX?
ATX, MicroATX, and Mini-ITX
PC cases themselves are often referred to by these three form factors, but the terms more accurately refer to the size of the motherboards they can host. ATX boards measure 12 by 9.6 inches, MicroATX up to 9.6 by 9.6 inches (they're sometimes smaller), and Mini-ITX 6.7 inches square.
How do you tell if your computer case is ATX?
An ATX case has a ~2" x ~6" slot above the 7th expansion slot. > > The hole is "above" all the card slots (as the case sets like a tower).
Is an ATX case a mid tower?
Full-tower and mid-tower cases both fit standard ATX motherboards—by far the most common motherboard size out there. Both can also fit smaller micro-ATX motherboards. Exact sizing varies from case to case, but most mid-towers run up to roughly 18 inches high and 8 or so inches wide.
Is Eatx better than ATX?
In terms of functionality, EATX performs better than ATX, how? Because EATX comes in a larger size, this means you get additional ports and slots for components. In an ATX board, you will usually find 3-4 PCle x 16 ports, and 4 RAM slots, whereas, in an EATX board you will find 4-8 PCle x 16 ports and 6-8 RAM slots.
What happens if you don't use a desktop case?
Your gpu will be ok because it clips in, but other stuff could come loose. Best if you can direct a small fan at it. It'll be fine, blow off any dust accumulated before putting into case. ... Plus, all your fans (case, CPU, GPU) will be exposed so anything could damage them.
What size PC case is best?
Computer Size Comparison
| Full Tower | Smaller Form Factor | |
|---|---|---|
| Motherboards | Mini-ITX MicroATX ATX EATX | Mini-ITX |
| 5.25″ Drive Bays | 3-6 | 1 |
| 3.5″ Drive Bays | 6-13 | 1-3 |
| 2.5″ Drive Bays | 0-10 | 0-2 |
Is ATX full size?
ATX is the most common motherboard design. ... Dimensions of a full-size ATX board are 12 × 9.6 in (305 × 244 mm), which allows many ATX chassis to accept microATX boards.
What PC case should I get 2020?
- Corsair iCue 5000X. The best PC case. ...
- Fractal Design Meshify-C. The best mid-tower PC case. ...
- Nanoxia Deep Silence 4. The best Micro ATX PC case. ...
- NZXT H200i. The best Mini-ITX case. ...
- Phanteks Evolv Shift X. The best home theater PC case. ...
- Fractal Design Define R5. ...
- Cooler Master H500P Mesh. ...
- Corsair Carbide Series SPEC-04 Tempered Glass.
How do you know if a case will fit a motherboard?
If you're not sure what size of motherboard fits in your case you can always find out by measuring what's already inside, and we recommend buying an ATX board if it will fit. The added expansion slots can be useful. Once you've picked a size, you need to select a processor socket.
Will any motherboard fit in my case?
Full size ATX cases will take any subtype - from full size ATX all the way down to mini-ITX (the latter beind a design originally produced by VIA for small form factor and home theater PCs). Generally you can fit any motherboard who's form factor is smaller than the case you are using.
What is a BTX motherboard?
Balance technology extended (BTX) is a form factor for motherboards that was initially intended to replace the 2004 and 2005 ATX motherboard. BTX is designed to decrease power needs and reduce heat. ... It is standardized by Intel and is not backward compatible with the ATX.
