How to Get my IP Address in Linux

The following commands will get you the private IP address of your interfaces:

1. ifconfig -a.
2. ip addr (ip a)
3. hostname -I | awk 'print $1'
4. ip route get 1.2. ...
5. (Fedora) Wifi-Settings→ click the setting icon next to the Wifi name that you are connected to → Ipv4 and Ipv6 both can be seen.
6. nmcli -p device show.

1. What is my IP from command line?
2. What is the ipconfig command for Linux?
3. How do I locate my IP address?
4. How do I find my IP address in Linux shell script?
5. What is the command for nslookup?
6. Can I use ipconfig in Linux?
7. How do I enable Internet on Linux?
8. What is the loopback IP address?
9. What is IP address example?
10. How do I see my phone's IP address?
11. How do I find my IP address in Unix?
12. How do I find my IP address and port number in Linux?
13. How do I find the hostname of an IP address?

What is my IP from command line?

First, click on your Start Menu and type cmd in the search box and press enter. A black and white window will open where you will type ipconfig /all and press enter. There is a space between the command ipconfig and the switch of /all. Your ip address will be the IPv4 address.

What is the ipconfig command for Linux?

Related Articles. ifconfig(interface configuration) command is used to configure the kernel-resident network interfaces. It is used at the boot time to set up the interfaces as necessary. After that, it is usually used when needed during debugging or when you need system tuning.

How do I locate my IP address?

On an Android smartphone or tablet: Settings > Wireless & Networks (or "Network & Internet" on Pixel devices) > select the WiFi network that you're connected to > Your IP address is displayed alongside other network information.

How do I find my IP address in Linux shell script?

Bash Shell Command to Find or Get IP address

1. In the above example, 192.168.1.2 is the IP address of the eth0 Ethernet interface. Of course, NIC (network interface card) name will be different as per your version of Unix system and network card driver. ...
2. Simply run: ifconfig. ...
3. Enter the following command to list all network interfaces from bash shell: # ip link show.

What is the command for nslookup?

Type nslookup -type=ns domain_name where domain_name is the domain for your query and hit Enter: Now the tool will display the name servers for the domain you specified.

Can I use ipconfig in Linux?

Supported OS: The ipconfig command is supported by the Microsoft Windows operating system, React OS, and Apple Mac OS. Some of the latest versions of the Linux OS also supports ipconfig. The ifconfig command is supported by Unix-based operating systems.

How do I enable Internet on Linux?

How to Connect to the Internet Using the Linux Command Line

1. Find the Wireless Network Interface.
2. Turn On the Wireless Interface.
3. Scan for Wireless Access Points.
4. WPA Supplicant Config File.
5. Find the Name of the Wireless Driver.
6. Connect to the Internet.

What is the loopback IP address?

A loopback address is a special IP address, 127.0. 0.1, reserved by InterNIC for use in testing network cards. ... The loopback address allows for a reliable method of testing the functionality of an Ethernet card and its drivers and software without a physical network.

What is IP address example?

An IP address is a string of numbers separated by periods. IP addresses are expressed as a set of four numbers — an example address might be 192.158. 1.38. Each number in the set can range from 0 to 255.

How do I see my phone's IP address?

To find your phone's IP address, go to Settings > About device > Status. Your phone or tablet's IP address will be displayed with other information, such as the IMEI or Wi-Fi MAC addresses: Mobile operators and ISPs also provide a so-called public IP address.

How do I find my IP address in Unix?

1. # /usr/sbin/ifconfig -a. inet 192.52.32.15 netmask ffffff00 broadcast 192.52.32.255.
2. # grep `hostname` /etc/hosts. 192.52.32.15 nyk4035 nyk4035.unix.com.
3. # ping -s `hostname. ` PING nyk4035: 56 data bytes. ...
4. # nslookup `hostname` nyk4035.unix.com canonical name = nyk4035.unix.com. Name: nyk4035.unix.com.

How do I find my IP address and port number in Linux?

How do I find the port number of a specific IP address? All you have to do is type “netstat -a” on Command Prompt and hit the Enter button. This will populate a list of your active TCP connections. The port numbers will be shown after the IP address and the two are separated by a colon.

How do I find the hostname of an IP address?

In an open command line, type ping followed by the hostname (for example, ping dotcom-monitor.com). and press Enter. The command line will show the IP address of the requested web resource in the response. An alternative way to call Command Prompt is the keyboard shortcut Win + R.