DNSMasq Ubuntu Tutorial

Edit the file a /etc/dnsmasq. conf and provide DHCP options.
...
Configure Dnsmasq as DHCP Server (Optional)

1. Default gateway IP address.
2. DNS server IP address (Probably Dnsmasq or different DNS server)
3. Network Subnet mask.
4. DHCP Addresses range.
5. NTP server.

1. How configure Dnsmasq Ubuntu?
2. How use Dnsmasq Linux?
3. What is Dnsmasq in Linux?
4. How do I run a DNS server on Ubuntu?
5. How do I know if Dnsmasq is running?
6. What is Dnsmasq Ubuntu?
7. Why we use Dnsmasq?
8. Is Dnsmasq safe?
9. What ports does Dnsmasq use?
10. Is Dnsmasq caching?
11. How do I kill Dnsmasq?
12. How do I start Dnsmasq server?

How configure Dnsmasq Ubuntu?

Install and Configure dnsmasq in Ubuntu 18.04

1. Free port 53 to use with dnsmasq. Ubuntu 18.04 uses systemd-resolve service that is bind with port 53. ...
2. Create a new “resolv.conf” file. ...
3. Install “dnsmasq” using apt repository. ...
4. Check version after Installation. ...
5. Add DNS records to dnsmasq. ...
6. Check dnsmaq Functionality using 'dig'

How use Dnsmasq Linux?

The dnsmasq server can be configured via the /etc/dnsmasq. conf file (which contains well commented and explained options), and user-defined configuration files can also be added in the /etc/dnsmasq. d directory. DNS is enabled by default, so before making any changes, make sure to create a backup of /etc/dnsmasq.

What is Dnsmasq in Linux?

Dnsmasq is a lightweight, easy to configure, DNS forwarder and DHCP server. It is designed to provide DNS and optionally, DHCP, to a small network. ... Dnsmasq supports static and dynamic DHCP leases and BOOTP/TFTP for network booting of diskless machines (source: from the package description).

How do I run a DNS server on Ubuntu?

Install and configure DNS on Ubuntu

1. Step 1- Update System. sudo apt-get update sudo apt-get upgrade sudo apt-get dist-upgrade.
2. Step 2 – Install DNS package. ...
3. Step 3 – Install DNS Utilities. ...
4. Step 4 – DNS Configuration. ...
5. Step 5 – Configuring NameServer. ...
6. Step 6 – Primary Master. ...
7. Step 7 – Configuration Files Verification.

How do I know if Dnsmasq is running?

Dnsmasq troubleshooting

1. See if dnsmasq is running with ps guax | grep dnsmasq. ...
2. Check the dnsmasq configuration files in /etc/dnsmasq.d. ...
3. There should be some settings in them and they should not mentioned that a service (DNS or DHCP) is not enabled.
4. In the DNS file, there should be two server lines, with an IP, like this: server=208.67.222.222.

What is Dnsmasq Ubuntu?

dnsmasq is a very lightweight local DNS server. dnsmasq can also be configured as a DNS cache server and DHCP server. dnsmasq has IPv4 and IPv6 supports including DHCPv4 and DHCPv6. dnsmasq is ideal for small network.

Why we use Dnsmasq?

dnsmasq caches DNS records, reducing the load on upstream nameservers and improving performance, and can be configured to automatically pick up the addresses of its upstream servers. dnsmasq accepts DNS queries and either answers them from a small, local cache or forwards them to a real, recursive DNS server.

Is Dnsmasq safe?

Google Security researchers identified seven vulnerabilities that can allow a remote attacker to execute code on, leak information from, or crash a device running a Dnsmasq version earlier than 2.78, if configured with certain options.
...
100.0%

What ports does Dnsmasq use?

Q: Why does dnsmasq open UDP ports >1024 as well as port 53.

Is Dnsmasq caching?

Dnsmasq is a lightweight DHCP and DNS caching nameserver. Unlike BIND, dnsmasq is incredibly simple to get up and running. The benefits of adding this will be quite obvious (like your DNS queries getting dramatically faster).

How do I kill Dnsmasq?

Comment out dns=dnsmasq in /etc/NetworkManager/NetworkManager. conf. Stop Dnsmasq with sudo killall -9 dnsmasq.

How do I start Dnsmasq server?

For those new to Dnsmasq, Dnsmasq is a simple, lightweight, easy to use and manage DNS server with support for Lua scripting, IPv6, DNSSEC, network booting for PXE, BOOTP, and TFTP.
...

1. Step 1: Install Dnsmasq on Ubuntu 20.04|18.04. ...
2. Step 2: Adding DNS records to Dnsmasq. ...
3. Step 3: Testing Dnsmasq DNS functionality.