Control Audio volume through the Ubuntu Command Line

Ubuntu Wiki

1. Open a terminal. (The quickest way is the Ctrl-Alt-T shortcut.)
2. Enter "alsamixer" and press the Enter key.
3. You will now see a user interface. In this user interface, you can do the following: Select your correct sound card using F6 and select F5 to see recording controls as well.

1. How do I change volume in Ubuntu?
2. How do I adjust volume in Linux terminal?
3. How do I increase volume in terminal?
4. How do I change volume in PulseAudio?
5. How do I adjust volume?
6. How do I set my volume?
7. How do I set the volume on my ALSA?
8. How do I increase the volume on my Raspberry Pi?
9. How do you save changes in Alsamixer?
10. How do I change volume in CMD?
11. How do I adjust microphone volume in Ubuntu?
12. How do I make sound louder on Linux?

How do I change volume in Ubuntu?

To change the sound volume, open the system menu from the right side of the top bar and move the volume slider left or right. You can completely turn off sound by dragging the slider to the left. Some keyboards have keys that let you control the volume.

How do I adjust volume in Linux terminal?

Here's how to change sound interactively in terminal. Start alsamixer in terminal. Then, you can use up/down arrow keys to adjust volume. Mouse scroll-wheel also works, if your terminal supports it.

How do I increase volume in terminal?

You can also use these commands to set keyboard shortcut to increase and decrease volume.

1. pactl. pactl command is used to control a running PulseAudio sound server.
2. Increase volume by 10% ...
3. Decrease volume by 10% ...
4. Set volume to 80% ...
5. Set volume to 200% ...
6. amixer. ...
7. Increase volume by 10% ...
8. Decrease volume by 10%

How do I change volume in PulseAudio?

This is the PulseAudio Volume Control graphical utility. You can configure the sound output from the Output Devices tab. You can drag the marked slider to the left to decrease the output sound, and drag it to the right to increase the output sound.

How do I adjust volume?

To access it, open the Control Panel, and go to Hardware and Sound. In the Sound section, click or tap the link that says "Adjust system volume." In the Volume Mixer window, set the desired sound level for the speakers, system sounds, or for the Windows apps that you have open.

How do I set my volume?

Turn your volume up or down

1. Press a volume button.
2. At the right, tap Settings: or . If you don't see Settings, go to the steps for older Android versions.
3. Slide the volume levels to where you want them: Media volume: Music, videos, games, other media. Call volume: Volume of the other person during a call.

How do I set the volume on my ALSA?

To change the ALSA-level volume controls directly, you can do the following: Open a terminal. (The quickest way is the Ctrl-Alt-T shortcut.) Enter "alsamixer" and press the Enter key.

How do I increase the volume on my Raspberry Pi?

Once you've SSH'd into your Pi, type "alsamixer". This will bring up an interface within the terminal which will allow you to set the volume of the Raspberry Pi. Simply press the up and down arrow keys to either increase or decrease the volume. When you are done, press ESC.

How do you save changes in Alsamixer?

1. sudo alsamixer. Make the changes you want. Save changes with.
2. sudo alsactl --file ~/.config/asound.state store. Open bashrc.
3. sudo nano ~/.bashrc. Add this line at the end.
4. alsactl --file ~/.config/asound.state restore.

How do I change volume in CMD?

To change the drive and the directory at the same time, use the cd command, followed by the “/d” switch. The “/d” parameter is used to change the current drive to a specific folder from another disk volume.

How do I adjust microphone volume in Ubuntu?

In the search bar enter as system settings and hit enter. Step 2: Under System Settings window, select Sound under Hardware. Step 3: In the Sound window, select Input tab. Step 4: Adjust the Input volume by moving the pointer position in the slide bar.

How do I make sound louder on Linux?

open up alsamixer in your terminal. select the right sound card if you have more than one with F6. change the volume using your desktop controls and notice, which alsamixer setting is changed.