Linux Ping Command Tutorial

Use one of the three ways to check the local network interface:

1. ping 0 – This is the quickest way to ping localhost. Once you type this command, the terminal resolves the IP address and provides a response.
2. ping localhost – You can use the name to ping localhost. ...
3. ping 127.0.

1. What is ping command with example?
2. How do I ping from terminal?
3. What does ping command do in Unix?
4. How do you ping with 10 packets?
5. How do you Ping 100 times?
6. How do you read ping results?
7. What is command for continuous ping?
8. How do I ping my router remotely?
9. How do I ping in redhat?
10. Is command in Linux?
11. How do you stop ping?

What is ping command with example?

Ping command syntax for Windows

How do I ping from terminal?

In the RUN box, type in CMD and press OK. 3. The Command Prompt will appear. Type in the address (or IP address you wish to ping).
...
Mac or Apple Instructions

1. Hold down the Command key (⌘) and press the spacebar.
2. When the Spotlight Search pops up, type "Terminal" and hit Enter. ...
3. Enter in the Ping command.

What does ping command do in Unix?

What is the ping command in UNIX? The ping command sends ICMP ECHO_REQUEST packets to network hosts and reports on the response from the remote server, outputting to standard output. It can be used to check if a remote host is up, or that network interfaces can be reached.

How do you ping with 10 packets?

Answer: Use ping option -c to specify the number of packets. After sending N number of packets, ping command will terminate automatically as explained below.

How do you Ping 100 times?

Windows OS

1. Hold the Windows key and press the R key to open the Run dialog box.
2. Type cmd and click OK.
3. Type ping -l 600 -n 100 followed by an external web address that responds to pings. For example: ping -l 600 -n 100 www.google.com.
4. Press Enter.

How do you read ping results?

How to Read Ping Test Results

1. Type "ping" followed by a space and an IP address, such as 75.186. ...
2. Read the first line to view the server's host name. ...
3. Read the following four lines to view the response time from the server. ...
4. Read the "Ping statistics" section to see the total numbers for the ping process.

What is command for continuous ping?

Use the command "ping 192.168. 1.101 -t" to initiate a continuous ping. Again, replace the IP address with one specific to your device as needed. The -t can be placed before or after the IP address.

How do I ping my router remotely?

1. Click "Start," type "command" into the search field and then choose "Command Prompt" from under Programs.
2. Type "ping [x]" (without quotation marks) into Command Prompt. Replace "[x]" with the IP address or host name of the target computer.
3. Press "Enter" to ping the remote computer.

How do I ping in redhat?

To do this, at a console prompt, type # ping -n <remote IP> where <remote IP> is the IP address of the remote computer and then press the <Enter> key. If you are able to execute the command without delay, the network interface is fully functional.

Is command in Linux?

The Linux command is a utility of the Linux operating system. All basic and advanced tasks can be done by executing commands. The commands are executed on the Linux terminal. The terminal is a command-line interface to interact with the system, which is similar to the command prompt in the Windows OS.

How do you stop ping?

Press Ctrl-C to stop pinging. Following are sample results of the ping command: Normal response--The normal response occurs in 1 to 10 seconds, depending on network traffic.